ANALYSIS OF ADDITION THE NUMBER OF HALF CIRCLE TYPE SLOT ON PERFORMANCE CHARACTERISTICS OF DISC CONDUCTOR EDDY CURRENT BRAKE

A. Jihan Saputra, D. D. Dwi Prija Tjahjana, M. Nizam, M. R. Aulia Putra

Abstract


Brake is a vital component of a vehicle, particularly for motor vehicles. One of the braking used the principle of Eddy Current Brake by utilizing electromagnetic. Eddy Current Brake is a braking technology without direct contact by utilizing eddy currents. Eddy Current Brake performance can be influenced by several factors, one of them is the surface shape of the disc conductor. Using finite element simulation, this research examines the impact of increasing the number of slot half-circles on the performance of the Eddy Current Brake with the number of slot changes. Variations number of slots that used are 6, 8, 10, and 12 slots. The result of this study obtained the best braking torque value in the variation with the number of 10 slots at a rotational speed of 450 rpm with a 15,930 Nm torque value. The addition slots of the number of half-circle types have a less significant effect on the torque from the simulation.


Full Text:

PDF

References


M. Günay, M.E. Korkmaz, & R. Özmen “An investigation on braking systems used in railway vehicles”, Engineering Science and Technology, an International Journal, vol 23, no. 2, pp. 421–431, 2020.

J. C. Gerdes & J. K. Hedrick “Brake system modeling for simulation and control”, Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, vol 121, no. 3, pp. 296–503, 1999.

P. M. Reza Aulia, M. Nizam, D. D. D. P. Tjahjana, M. Aziz, & A. R. Prabowo. “Application of multiple unipolar axial eddy current brakes for lightweight electric vehicle braking”, Applied Sciences (Switzerland), vol 10, no. 13, 2020.

S. Cho, H. C. Liu, J. Lee, C. M. Lee, S. C. Go, S. H. Ham, J. H. Woo & H. W. Lee. “Design and analysis of the eddy current brake with the winding change”, Journal of Magnetics, vol 2, no 1, pp. 23–28, 2017.

K. Karakoc, A. Suleman & E. J. Park, “Analytical modeling of eddy current brakes with the application of time varying magnetic fields”, Applied Mathematical Modelling, vol 40, no. 2, pp. 1168–1179, 2016.

B. Lequesne, “Eddy-current machines with permanent magnets and solid rotors”, IEEE Transactions on Industry Applications, vol 33, no. 5, pp. 1289–1294, 1997.

S. Cho, H. C. Liu, H. Ahn, J. Lee & H. W. Lee, “Eddy Current Brake with a Two-Layer Structure: Calculation and Characterization of Braking Performance”, IEEE Transactions on Magnetics, vol 53, no. 11, 2017.

A. Sinmaz, M. O. Gulbahce, & D. A. Kocabas, “Design and finite element analysis of a radial-flux salient-pole eddy current brake”, ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering, 2016, pp. 590–594.

R. S. Robert, “2D model of axial-flux eddy current brakes with slotted conductive disk rotor”, 2017 International Siberian Conference on Control and Communications, 2017, pp. 0-5.

A. R. Prayoga, N. M. Ubaidillah & H. T. Waloyo, “The Influence of Aluminum Conductor Shape Modification on Eddy-Current Brake Using Finite Element Method”, ICEVT 2019 - Proceeding: 6th International Conference on Electric Vehicular Technology, 2019, pp. 146–150.

O. Rodrigues, O. Taskar, S. Sawardekar, H. Clemente & G. Dalvi,” Design & Fabrication of Eddy Current Braking System”, International Research Journal of Engineering and Technology, vol 3, no. 04, pp. 809–815, 2016.

P. S. Satya, P. G. S. Chandra, & M. B. Raghavendra, “A Study about Eddy Current Brakes”, International Journal of Trending in Innovative Research, vol 3, no. 3, pp. 50–55, 2021.

H. K. Razavi, & M. U. Lampérth, “Eddy-current coupling with slotted conductor disk”, IEEE Transactions on Magnetics, vol 42, no. 3, pp. 405–410, 2006.

H. T. Waloyo, U. Ubaidillah, D. D. D. P., Tjahjana, M. Nizam & M. Aziz, “A novel approach on the unipolar axial type eddy current brake model considering the skin effect” Energies, vol 13, no. 7, pp. 1–15, 2020.

U. Ubaidillah, S. Suwolo, A.R. Prayoga, M. Nizam & H. T. Waloyo, “Magnetic flux distribution and braking torque of a grooved eddy current brake”. 2020 2nd International Conference on Computer and Information Sciences, ICCIS 2020.

M. R. A. Putra, M. Nizam, D. D. D. P. Tjahjana & H. T. Waloyo, “The Effect of Air Gap on Braking Performance of Eddy Current Brakes on Electric Vehicle Braking System”, ICEVT 2019 - Proceeding: 6th International Conference on Electric Vehicular Technology, 2019, pp. 355–358.

B. Kou, Y. Jin, H. Zhang, L. Zhang & H. Zhang, “Modeling and analysis of force characteristics for hybrid excitation linear eddy current brake”, IEEE Transactions on Magnetics, vol. 50, no.11, 2014.

M. Taghizadeh Kakhki, J. Cros & P. Viarouge, “New Approach for Accurate Prediction of Eddy Current Losses in Laminated Material in the Presence of Skin Effect with 2-D FEA”, IEEE Transactions on Magnetics, vol 52, no. 3, 2016.




DOI: http://dx.doi.org/10.2022/jmet.v14i1.6244

PRINT ISSN No.: 2180-1053
E ISSN No.: 2289-8123