Analysis of Sitting Posture Recognition using Pressure Sensors

Ahmad Zaki Hj Shukor, Nur Atiqa Natrah, Muhammad Amir Afiq, Muhammad Herman Jamaluddin, Zamre Abd Ghani, Hairol Nizam Mohd Shah, Mohd Zamzuri Ab Rashid

Abstract


The sitting posture is one of the most common posture a human being performs. It is usual to see that most of the time, human sit down while doing their activities such as studying, desk work and meetings. Researchers study sitting postures by using sensors such as piezoelectric resistors, fiber optics or even gyroscopes. For our study, we utilize pressure force resistive sensors (FSR) to investigate the sitting posture of students in a lecture environment (classroom). At first we design setup of sensors for measuring pressure during sitting position using pressure sensors, then we analyze sitting posture of the students by using force sensitive resistor sensor and later we investigate the efficiency of the pressure sensing system. We used 11 FSR which is the significantly small amount of sensors at the hipseat and backseat to identify the eight different sitting the posture of the subject at 1 Hz frequency of measurement. Even though the weight of the subjects vary from 40 to 100 kg, the accuracy was acceptable at 90%. Additionally we performed experiments in actual running lecture sessions and later performed quiz to relate the sitting posture with the focus/concentration of students in the class.

Keywords


Sitting Posture; Force Sensitive Resistors; Hipseat; Backseat; Pressure Sensors;

Full Text:

PDF

References


J. E. Estrada, and L. A. Vea, “Real-Time Human Sitting Posture Detection Using Mobile Devices,” IEEE Region 10 Symposium (TENSYMP), Bali, 2016, pp 140-144.

B. W. Lee, and H. Shin, “Feasibility Study of Sitting Posture Monitoring Based on Piezoresistive Conductive Film-Based Flexible Force Sensor,” IEEE Sensors Journal, vol. 16, no. 1, pp 15-16, January 2016.

B. Ribeiro, H. Pereira, R. Almeida, A. Ferreira, L. Martins, C. Quaresma, and P. Vieira, “Optimization of Sitting Posture Classification Based on User Identification,” IEEE 4th Portuguese BioEngineering Meeting Porto, 26-28 February 2015, pp. 1-6.

L. Shu, X. Tao, and D. D. Feng, “A New Approach for Readout of Resistive Sensor Arrays for Wearable Electronic Applications,” IEEE Sensors Journal, vol. 15, no. 1, pp 442-452, January 2015.

S. Suzuki, M. Kudo, and A. Nakamura, “Sitting Posture Diagnosis Using a Pressure Sensor Mat,” 2016 IEEE International Conference on Identity, Security and Behavior Analysis (ISBA), Sendai Japan, 2016, pp. 1 to 6 .

Y. Taguchi, D. Hirashima, M. NIshiyama, T. Kon, and K. Watanabe, “Sensitive Cushion Based on Hetero-core Fiber Optics for Unconstraint Sitting Posture Monitoring,” IEEE 3rd Global Conference on Consumer Electronics (GCCE), October 2014, pp 640- 642.

M-C. Huang, N. Amini, L. He, and M. Sarrafzadeh, “eCushion: A Textile Pressure Sensor Array Design and Calibration for Sitting Posture Analysis,” IEEE Sensors Journal, vol. 13, no. 10, pp 3926- 3934, October 2013.

Y-R. Huang and X-F. Ouyang, “Sitting Posture Detection And Recognition Using Force Sensor,” 5th International Conference on BioMedical Engineering and Informatics (BMEI 2012), October 2012, pp 1117- 1121.

B. Mutlu, A. Krause, J. Forlizzi, C. Guestrin, J. Hodgins, “Robust, Low-cost, Non-intrusive Sensing and Recognition of Seated Postures,” Proc. Of the 20th Annual ACM Symposium on User Interface Software and Technology, October 7–10, 2007, pp 149-158.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

ISSN: 2180-1843

eISSN: 2289-8131