Browse Title Index


 
Issue Title
 
Vol 6, No 2 (2012) INTERRELATIONSHIP BETWEEN AVAILABILITY WITH PLANNING FACTOR AND MEAN TIME BETWEEN FAILURES (MTBF) IN OVERALL EQUIPMENT EFFECTIVENESS (OEE) Abstract   PDF   FLIPBOOK
Puvanasvaran, A.P., Teoh Y. S., and Tay, C. C.
 
Vol 10, No 2 (2016) INVESTIGATION ON HOT DEFORMATION BEHAVIOR OF AL-CU-MG-PB ALLOY Abstract   PDF   FLIPBOOK
hamidreza Rezaei Ashtiani, p. shahsavari
 
Vol 10, No 1 (2016) INVESTIGATIONS OF FORCES, POWER AND SURFACE ROUGHNESS IN HARD TURNING WITH MIXED CERAMIC TOOL Abstract   PDF   Flipbook
Varaprasad Bhemuni
 
Vol 8, No 2 (2014) KANO MODEL APPROACH FOR DESIGN IMPROVEMENT ASSOCIATED WITH ERGONOMICS ISSUES IN CNC MACHINE DESIGN Abstract   PDF   FLIPBOOK
H. Sihombing, I. Halim, M.A. Rahman, B. Abu Bakar, S.K. Khalid
 
Vol 7, No 2 (2013) LAPTOP CASING AESTHETIC IMPROVEMENT Abstract   PDF   FLIPBOOK
Wan Malek, W.N., Maidin, S.
 
Vol 10, No 1 (2016) LASER FORMING OF METALLIC DOME-SHAPED PARTS USING SPIRAL AND RADIAL-CIRCULAR SCAN PATHS Abstract   PDF   Flipbook
Mehdi Safari
 
Vol 8, No 1 (2014) LEAN BEHAVIOR IMPACT TOWARDS LEAN MANAGEMENT: A CASE STUDY Abstract   PDF   FLIPBOOK
A.M.S Hamouda, A.P. Puvanasvaran, N. Norazlin, C. Suk Fan
 
Vol 6, No 2 (2012) LEAN SIX SIGMA APPROACH FOR LABOR PRODUCTIVITY IMPROVEMENT AT FINAL TEST SEMICONDUCTOR MANUFACTURING Abstract   PDF   FLIPBOOK
Md Nizam, M.A.R, Rohana, A., Norlymalis, J.K.
 
Vol 6, No 2 (2012) MACHINING MODEL OF TI-6AL-4V TITANIUM ALLOY USINGFEM SIMULATION Abstract   PDF   FLIPBOOK
Hadzley, M.M.A., Raja Izamshah, R.A., Amran, M.M.A.
 
Vol 8, No 1 (2014) MALAYSIAN INNOVATION ECOSYSTEM: A REVIEW OF THE LITERATURE Abstract   PDF   FLIPBOOK
M.Y. Sulaiman, A. Abdullah, N.A. Othman
 
Vol 8, No 2 (2014) MANUFACTURE OF SIZEABLE MULTISCALE COMPOSITES THROUGH ENHANCEMENT OF RESIN FLOW IN THE RIDFT PROCESS Abstract   PDF   FLIPBOOK
L.E. Parker, O.I. Okoli
 
Vol 10, No 2 (2016) MATERIAL SELECTION FOR AUTOMOTIVE FENDER DESIGN USING INTEGRATED AHP-TOPSIS Abstract   PDF   FLIPBOOK
Hambali Bin Arep@ Ariff, Goh Chia Min, Amira Farhana Binti Mohamad Tar, Rosidah Binti Jaafar
 
Vol 6, No 1 (2012) MERCERIZATION PARAMETERS EFFECT ON NATURAL FIBER REINFORCED POLYMER MATRIX COMPOSITE: A REVIEW Abstract   PDF   FLIPBOOK
Yussni M.H.
 
Vol 10, No 1 (2016) MICROELECTRONICS THERMAL DISSIPATION CHARACTERIZATION USING TRIZ Abstract   PDF   Flipbook
Mingchung Ong
 
Vol 10, No 2 (2016) MICROSTRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF LM6 ALLOY PROCESSED BY COOLING SLOPE CASTING Abstract   PDF   FLIPBOOK
Mohd Shukor Salleh, Nurul Naili Mohamad Ishak, Mohd Azizul Hikmi Safian, Saifudin Hafiz Yahaya
 
Vol 10, No 2 (2016) MICROSTRUCTURE AND PHASE OF POLY(VINYLIDEN FLUORIDE) FILMS BY ELECTROPHORETIC DEPOSITION: EFFECT OF POLYMER DISPERSION’S STIRRING CONDITIONS Abstract   PDF   FLIPBOOK
Kok Tee Lau, Mohd Shahadan Mohd Suan, M. Zaimi, Jeefferie Abd Razak, M.A. Azam, N. Mohamad
 
Vol 10, No 1 (2016) MINIMIZING NUMBER OF DEFECTS IN NICKEL PLATING PROCESS USING FACTORIAL DESIGN Abstract   PDF   Flipbook
Nurul Qasturi Baharuddin, Lukman Sukarma, Effendi Mohamad
 
Vol 11, No 1 (2017) Modeling and Simulation Affect of Binder Addition Rate on Ammonia Emission During Granulation Process Abstract   PDF   FLIPBOOK
N. Mohamad, D. Shafeeq, A. Shaaban, M.A. Nurhuda
 
Vol 8, No 1 (2014) Modelling of Gas Metal Arc Welding Process on Angular Distortion of T Joint Abstract   PDF   FLIPBOOK
P. Swanson1, S. Effendi, Md Nizam
 
Vol 9, No 1 (2015) NASI LEMAK PACKAGING: A CASE STUDY OF FOOD FRESHNESS AND DESIGN FLEXIBILITY Abstract   PDF   Flipbook
Maidin S., Latiff A.N.
 
Vol 8, No 2 (2014) NATURAL GAS COMBUSTION INSIDE A CONFINED VOLUME CHAMBER USING GAS-JET IGNITION METHOD Abstract   PDF   FLIPBOOK
Mas Fawzi, Yoshiyuki Kidoguchi
 
Vol 8, No 1 (2014) OPERATION BASED COST ASSESSMENT OF MACHINED PARTS IN THE EARLY DESIGN STAGES Abstract   PDF   FLIPBOOK
G.I.P. Perera
 
Vol 7, No 2 (2013) OPTIMIZATION OF TURNING PARAMETERS FOR TITANIUM ALLOY TI-6AL-4V ELI USING THE RESPONSE SURFACE METHOD (RSM) Abstract   PDF   FLIPBOOK
Sulaiman, M.A., Che Haron, C.H., Ghani, J.A., Kasim, M.S.
 
Vol 6, No 1 (2012) OVERVIEW: PROCESS PARAMETERS FORHYDROTHERMAL SYNTHESIS OF HYDROXYAPATITE Abstract   PDF   FLIPBOOK
Fatimah, M., Shaaban, A., Seliman, S.
 
Vol 11, No 1 (2017) Production of LM4 Feedstock for Thixoforming by using Cooling Slope Casting Abstract   PDF   FLIPBOOK
M. A. H. Safian, M. S. Salleh, N. I. S. Hussein, M. A. Sulaiman, S. H. Yahaya
 
51 - 75 of 99 Items << < 1 2 3 4 > >> 


© Journal of Advanced Manufacturing Technology