EFFECTS OF DIFFERENT PRE-TREATMENTS ON THE PERFORMANCE OF KENAF FIBER REINFORCED ALUMINUM LAMINATES SANDWICH COMPOSITE

E. Osman, A.R.M. Warikh, S.H. Yahaya, M.E.A. Manaf, T. Moriga

Abstract


Fiber metal laminate (FML) offers some superior mechanical properties as compared to either conventional polymer composites or high strength monolithic aluminum. Treatment of individual elements of composites is one of the effective methods to improve the performance of composites. This study focuses on the effects of different pre-treatments of fiber and metal sheet to the performance of metal laminate composite containing kenaf reinforced epoxy as the core composite. The kenaf fibers and aluminum sheet underwent different types of treatment to improve the interfacial adhesion. The results showed that the composites with surface roughened aluminum sheets gave higher values of flexural strength than those with alodine treated aluminum sheets. However, composites with alodine treated aluminum showed the highest impact strength, contributed by interfacial delamination as a result of less firm adhesion between Al sheet and composite core. The fiber metal laminate sandwich composites also showed improvement in water resistance as compared to the kenaf fiber reinforced composite, particularly those with alkaline treated fibers. In conclusion, surface treatments on the Al sheets and kenaf fibers were effective to improve the mechanical and water absorption properties of kenaf fiber reinforced aluminum laminates (KeRALL).

Full Text:

PDF

References


E.C. Botelho, L.C. Pardini and M.C. Rezende, “Evaluation of hygrothermal effects on the shear properties of Carall composites”, Material Science and Engineering: A, vol. 452, pp. 292–301, 2007.

A. Asundi and A.Y.N. Choi, “Fiber metal laminates: An advanced material for future aircraft”, Material Processing Technology, vol. 63, no. 1-3, pp. 384–394, 1997.

L.B. Vogelesang and A. Vlot. “Development of fiber metal laminates for advanced aerospace materials”, Journal of Material Processing Technology, vol. 103, pp. 1-5, 2000.

E.C. Botelho, R.A. Silva, L.C. Pardini and M.C. Rezende, “Evaluation of adhesion of continuous fiber–epoxy composite/aluminum laminates”, Journal of Adhesion Science and Technology, vol. 18, no. 15 -16, pp. 1799-1813, 2004.

T. Sinmazçelik, E. Avcu, M.Ö Bora and O. Çoban, “A review: Fiber metal laminates, background, bonding types and applied test methods”, Material Design, vol. 32, pp. 3671- 3685, 2011.

M. Vasumathi and V. Murali, “Effect of Alternate Metals for use in Natural Fiber Reinforced Fiber Metal Laminates under Bending, Impact and Axial Loadings”, Procedia Engineering, vol. 64, pp. 562-570, 2013.

L.M.G. Vieira, J.C. Santos, T.H. Panzera, J.C.C. Rubio and F. Scarpa, “Novel fiber metal laminate sandwich composite structure with sisal woven core”, Industrial Crops and Products, vol. 99, pp. 189-195, 2017.

H.M. Akil, M.F. Omar, A.A.M. Mazuki, S. Safiee, Z.A.M Ishak and A. Abu Bakar, “Kenaf fiber reinforced composites: A review”, Material and Design, vol. 32, no. 8-9, pp. 4107-4121. 2011.

A. Ashori, J. Harun, W.D. Raverty and M.N.M. Yusoff, “Chemical and morphological characteristics of Malaysian cultivated kenaf (Hibiscus cannabinus) fiber”, Polymer- Plastics Technology and Engineering, vol. 45, no. 1, pp. 131-134, 2006.

A.A.M. Mazuki, H.M. Akil, S. Safiee, Z.A.M. Ishak and A.A. Bakar, “Degradation of dynamic mechanical properties of pultruded kenaf fiber reinforced composites after immersion in various solutions”, Composite Part B: Engineering, vol. 42, no. 1, pp. 71-76, 2011.

R. Karnani, M. Krishnan and R. Narayan, “Biofiber reinforced polypropylene composites”, Polymer Engineering and Science, vol. 37, no. 2, pp. 476–483, 1997.

B.F. Yousif, A. Shalwan, C.W. Chin and K.C. Ming, “Flexural properties of treated and untreated kenaf/epoxy composites”, Material and Design, vol. 40, pp. 378–385, 2012.

A.M. Edeerozey, H.M. Akil, A.B. Azhar and M.Z. Ariffin, “Chemical modification of kenaf fibers”, Material Letters, vol. 61, no. 10, pp. 2023–2025, 2007.

G.W. Critchlow, K.A. Yendall, D. Bahrani and A. Quinn and F. Andrews, “Strategies for the replacement of chromic acid anodising for the structural bonding of aluminum alloys”, International Journal of Adhesion and Adhesives, vol. 26, no. 6, pp. 419–453, 2006.

S.Y. Park, W.J. Choi, H.S. Choi, H. Kwon and S.H. Kim, “Recent trends in surface treatment technologies for airframe adhesive bonding processing: a review (1995–2008)”, The Journal of Adhesion, vol. 86, no. 2, pp. 192–221, 2010.

A.F. Harris and A. Beevers, “The effects of grit-blasting on surface properties for adhesion”, International Journal of Adhesion and Adhesives, vol. 19, no. 6, pp. 445–452, 1999.

N. Anagreh, L. Dorn and C. Bilke-Krause, “Low-pressure plasma pretreatment of polyphenylene sulfide (PPS) surfaces for adhesive bonding”, International Journal of Adhesion and Adhesives, vol. 28, no. 1–2, pp. 16–22, 2008.

J.C.S. Fernandes, M.G.S. Ferreira, D.B. Haddow, A. Goruppa, R. Short and D.G. Dixon, “Plasma-polymerised coatings used as pre-treatments for aluminium alloys”, Surface and Coatings Technology, vol. 154, no.1, pp. 8–13, 2002.

M.K. Gupta and R.K. Srivastava, “Mechanical properties of hybrid fibers-reinforced polymer composite: A review”, Polymer-Plastics Technology and Engineering, vol. 55, no. 6, pp. 626-642, 2016.

A. Vlot and J.W. Gunnink, Fiber Metal Laminates an Introduction. Dordrecht, Netherlands: Kluwer Academic Publishers, 2001.

G.B Chai and P. Manikandan, “Low velocity impact response of fiber metal laminates - A review”, Composite Structures, vol. 107, pp. 363–381, 2014.

O. Edynoor, T. Moriga, K. Murai and A.R.M. Warikh, “Study of morphology and electrical properties of indium zinc oxide-modified kenaf fiber”, Industrial Crops and Products, vol. 100, pp. 171-175, 2017.

G.W. Beckermann and K.L. Pickering, “Engineering and evaluation of hemp fiber reinforced polypropylene composites: fiber treatment and matrix modification”, Composite Part A: Applied Science and Manufacturing, vol. 39, no. 6, pp. 979–988, 2008.

M. Bera, R. Alagirusamy and A. Das, “A study on interfacial properties of jute-PP composites”, Journal of Reinforced Plastics and Composites, vol. 29, no. 20, pp. 3155–3161, 2010.

R. Das, A. Chanda, J. Brechou and A. Banerjee, Impact Behavior of Fiber-Metal Laminates. UK, Cambridge: Woodhead Publishing, 2016.

P. Cortés and W.J. Cantwell, “The Impact Properties of High Temperature Fiber Metal Laminates”, Journal of Composite Materials, vol. 41, no. 5, pp. 613-632, 2007.

J. Laliberté, C. Poon and P.V. Straznicky, “Low-velocity impact damage in GLARE fibre-metal laminates”, in Proceedings of International Committee on Composite Materials ICCM-12, France, 1999, pp. 1-10.

E.C. Botelho, R.A. Silva, L.C. Pardini and M.C. Rezende, “A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures”, Materials Research, vol. 9, no. 3, pp. 247–256, 2006.

K. Derrien, and P. Gilormini, “The effect of moisture-induced swelling on the absorption capacity of transversely isotropic elastic polymer–matrix composites”, International Journal of Solids and Structures, vol. 46, no. 6, pp. 1547–1553, 2009.

O. Edynoor, T. Moriga, K. Murai, A.R.M. Warikh, M.E.A. Manaf and T. Horikawa, “Photocatalytic activity of nanostructured tubular TiO2 synthesized using kenaf fibers as a sacrificial template”, Industrial Crops and Products, vol. 113, pp. 210-216, 2018.

A.N. Fraga, E. Frullloni, O. De La Osa and J.M. Kenny and A. Vázquez, “Relationship between water absorption and dielectric behavior of glass fiber reinforced unsaturated polyester resin”, Journal of Composites Materials, vol. 41, no. 4, pp. 393-402, 2007.




© Journal of Advanced Manufacturing Technology