MATHEMATICAL MODELLING OF THE PASSIVE AND SEMI-ACTIVE AUTOMOBILE SUSPENSION SYSTEMS IN FORD SCORPIO CAR MODEL

S.H. Yahaya, S.F. Yaakub, M.S. Salleh, A.R.M. Warikh, A. Abdullah, M.R.A. Purnomo

Abstract


The suspension is a system of spring or shock absorbers connecting the wheels and axles at the chassis of a vehicle. In this study, Ford Scorpio car with passive and semi-active suspension system are formulated using Second Order Differential Equations (ODE). These models were solved analytically using the undetermined coefficient and Cramer rule methods. The comparison between passive and semi-active suspension system also conducted to measure such as displacement, frequency and time by plotting graphs. The passive system resulted that a constant displacement roughly at 0.035 m while 0.025 m was obtained by a semi-active suspension system. Semi-active system took t = 1 s to yield a constant displacement while for the passive suspension system required t = 1.5 s. The comparison showed the semi-active results were better than a passive suspension system.

Full Text:

PDF

References


A.A. Aly and F.A. Salem, "Vehicle Suspension System Control: A Review," International Journal of Control, Automation and Systems, vol. 2, no. 2, pp. 46–54, 2013.

R.E. Clark, D.S. Smith and P.H. Mellor, "Design Optimization of Moving-Magnet Actuators for Reciprocating Electro-Mechanical Systems," IEEE Transactions on Magnetics, vol. 31, no. 6, pp. 3746-3748, 1995.

D.L. Trumper, W.J. Kim and M.E. Williams, "Design and Analysis Framework for Linear Permanent- Magnet Machines Industry Applications," IEEE Transactions on Industry Applications, vol. 32, no. 2, pp. 371- 379, 1996.

Z.Q. Zhu and D. Howe, "Magnet Design Considerations for Electrical Machines Equipped with Surface Mounted Permanents," in Proceeding of the 13th International Workshop Rate-earth Permanent Magnets Application, Birmingham, 1994, pp. 151-160.

A. Kruczek and A. Stribrsky, "H∞ Control of Automotive Active Suspension with Linear Motor," in Proceedings of the 3rd IFAC Symposium on Mechatronic Systems, Sydney, 2004, pp. 365-370.

A. R. Bhise, R.G. Desai, R.N. Yerrawar, A. C. Mitra and R. R. Arakerimath, "Comparison Between Passive and Semi-Active Suspension System Using Matlab/Simulink," IOSR Journal of Mechanical and Civil Engineering, vol. 13, no. 4, pp. 1-6, 2016.

F. Tu, Q. Yang, C. He and L. Wang, "Experimental Study and Design on Automobile Suspension Made of Magneto-Rheological Damper," Energy Procedia, vol. 16, pp. 417-425, 2012.

Y. M. Sam and J.H.S.B. Osman, "Modelling and Control of Active Suspension System using Proportional Integral Sliding Mode Control," Asian Journal of Control, vol. 7, no. 2, pp. 91-98, 2005.

Y. M. Sam, "Robust Control of Active Suspension System for a Quarter Car Model," Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 2950 Technical Report, 2006.

M.J. Griffin, Handbook of Human Vibration. London: Academic Press, 1996.

P. Sathishkumar, J. Jancirani, D. John and S. Manikandan, "Mathematical Modelling and Simulation Quarter Car Vehicle Suspension," International Journal of Innovative Research in Science, Engineering and Technology, vol. 3, no. 1, pp. 1280-1283, 2014.

A. Shirahatti, P.S.S. Prasad, P. Panzade and M.M. Kulkarni, "Optimal Design of Passenger Car Suspension for Ride and Road Holding," Journal of the Brazilian Society of Mechanical Science & Engineering, vol. 30, no.1, pp. 66-76, 2008.

A. Gokturk, "Determination of Appropriate Axial Vibration Dampers for a Naval Vessel Driven by CODAG Propulsion," Periodicals of Engineering and Natural Sciences, vol. 5, no. 3, pp. 371-377, 2017.

A. Z. M. Amin, S. Ahmad and Y. S. Hoe, "Electromagnetics Car Suspension System," Indian Journal of Science and Technology, vol. 9, no. 40, pp. 1-4, 2016.

Y. Shiao, Q. A. Nguyen and C. C. Lai, "A Novel Design of Semi-Active Suspension System Using Magneto Rheological Damper on Light-Weight Vehicle," Transactions of the Canadian Society for Mechanical Engineering, vol. 37, no. 3, pp. 723-732, 2013.

N. M. Suaib and Y. M. Sam, "Modelling and Control of Active Suspension Using PISMC and SMC," Jurnal Mekanikal, vol. 26, no. 2, pp. 119-128, 2008.

S. A. Wahid, I. Ismail, S. Aid and M. S. A. Rahim, "Magneto-Rheological Defects and Failure: A Review," IOP Conference Series: Material Science and Engineering, vol. 114, pp. 1-12, 2015.

M. R. Jamli, "Finite element analysis of springback process in sheet metal forming”, Journal of Advanced Manufacturing Technology, vol. 11, no. 1(1), pp. 75-84, 2017.

M. Yu, C. Arana, S. A. Evagelou and D. Dini, "Quarter-car experimental study for series active variable geometry suspension”, IEEE Transactions on Control Systems Technology, vol. 27, no. 2, pp. 743-759, 2017.

C.Y. Lai and W. H. Liao, "Vibration Control of a Suspension System via a Magnetorheological Fluid Damper," Journal of Vibration and Control, vol. 8, no. 4, pp. 527-547, 2002.




© Journal of Advanced Manufacturing Technology