EXPERIMENTAL DESIGN APPROACH FOR STUDYING OVERHANGING FEATURES IN SELECTIVE LASER MELTING

A.E. Patterson, S.L. Messimer, P.A. Farrington, C.L. Carmen, J.T. Kendrick

Abstract


As additive manufacturing (AM) processes become more refined and widely used, it is essential for engineers and designers to understand the processes in order to effectively use them within manufacturing systems; however, most of the existing methods for analyzing AM processes are too complex and specialized for use in practice. This study proposes a simple technique to derive information about the behavior of unsupported overhanging features in parts made using selective laser melting (SLM) using a first-principles finite element model and factorial experiment. This method can be used to assist with design decisions without production of prototypes, resulting in improved design and reduced cost. The case study presented examined five factors (laser power, laser spot size, scan speed, feature thickness, and the use of support material) in a 25 full-factorial arrangement with two stress and two deformation responses. An analysis of variance (ANOVA) was completed on the results, showing the significance of both the factors and the interactions between them. Two materials were studied (Ti-6Al-4V and 316L stainless steel). The results were compared to some similar stress and deformation results from experimental literature and were found to match well with the greatly simplified approach.

Full Text:

PDF

References


M.K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R.I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja and F. Martina, “Design for additive manufacturing: Trends, opportunities, considerations, and constraints,” CIRP Annals, vol. 65, no. 2, pp. 737-760, 2016.

N. Guo and M. Leu, “Additive manufacturing: Technology, applications, and research needs,” Frontiers in Mechanical Engineering, vol. 8, no. 3, pp. 215-243, 2013.

A.E. Patterson, “Design of experiment to analyze effect of input parameters on thermal stress and deformation in overhanging part features created with the SLM additive manufacturing process,” M.S. thesis, Department of Industrial & Systems Engineering and Engineering Management, University of Alabama in Huntsville, Huntsville, Alabama, USA, 2014.

W. Meiners, K. Wissenbach and A. Gasser, “Selective laser sintering at melting,” U.S. Patent No. 6,215,093. Washington, DC: U.S. Patent and Trademark Office, 2001.

M. Safari and M. Farzin, “Experimental investigation of laser forming of a saddle shape with spiral irradiating scheme,” Optics & Laser Technology, vol. 66, pp. 146-150, 2015.

M. Safari, H. Mostaan and M. Farzin, “Laser bending of tailor machined blanks: Effect of start point of scan path and irradiation direction relation to step of the blank,” Alexandria Engineering Journal, vol. 55, no. 2, pp. 1587-1594, 2016.

H. Mostaan, M. Shamanian, S. Hasani, M. Safari and J.A. Szpunar, “Nd:YAG laser micro-welding of ultra-thin FeCo-V magnetic alloy: Optimization of weld strength,” Transactions of Nonferrous Metals Society of China, vol. 27, no. 8, pp. 1735-1746, 2017.

M. Safari and H. Mostaan, “Experimental and numerical investigation of laser forming of cylindrical surfaces with arbitrary radius of curvature,” Alexandria Engineering Journal, vol. 55, no. 3, pp. 1941-1949, 2016.

M. Safari, M. Farzin and H. Mostaan, “A novel method for laser forming of two-step bending of a dome shaped part,” Iranian Journal of Materials Forming, vol. 4, no. 2, pp. 1-14, 2017.

M. Safari and J. Joudaki, “Prediction of bending angle for laser forming of tailor machined blanks by neural network,” Iranian Journal of Materials Forming, vol. 5, no. 1, pp. 47-57, 2018.

A.E. Patterson, S.L. Messimer and P.A. Farrington, “Overhang Features and the SLM/DMLS Residual Stresses Problem: Review and Future Research Need,” Technologies, vol. 5, no. 2, pp. 15, 2017.

A. Hussein, L. Hao, C. Yan and R. Everson, “Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting,” Materials & Design, vol. 52, pp. 638-647, 2013.

P. Mercelis and J.P. Kruth, “Residual stresses in selective laser sintering and selective laser melting,” Rapid Prototyping Journal, vol. 12, no. 5, pp. 254-265, 2006.

R. Sundar, P. Hedaoo, K. Ranganathan, K. Bindra and S. Oak, “Application of Meshes to Extract the Fabricated Objects in Selective Laser Melting,” Materials and Manufacturing Processes, vol. 29, no. 4, pp. 429-433, 2014.

G. Adam and D. Zimmer, “Design for Additive Manufacturing – Element transitions and aggregated structures,” CIRP Journal of Manufacturing Science and Technology, vol. 7, no. 1, pp. 20-28, 2014.

D. Rosen, “Computer-Aided Design of Additive Manufacturing of Cellular Structures,” Computer-Aided Design & Applications, vol. 4, no. 5, pp. 585-594, 2007.

K. Salonitis, “Design for additive manufacturing based on the axiomatic design method,” The International Journal of Advanced Manufacturing Technology, vol. 87, no. 5, pp. 989-996, 2016.

T. Craeghs, S. Clijsters, E. Yasa, F. Bechmann, S. Berumen and J-P. Kruth, “Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring,” Optics and Lasers in Engineering, vol. 49, no. 12, pp. 1440-1446, 2011.

M. Matsumoto, M. Shiomi, K. Osakada and F. Abe, “Finite element analysis of single layer forming on metallic powder bed in rapid prototyping by selective laser processing,” International Journal of Machine Tools & Manufacture, vol. 42, no. 1, pp. 61-67, 2002.

E. Mirkoohi, J. Ning, P. Bocchini, O. Fergani, K-N. Chiang and S.Y. Liang, “Thermal modeling of temperature distribution in metal additive manufacturing considering effects of build layers, latent heat, and temperature-sensitivity of material properties,” Journal of Manufacturing and Materials Processing, vol. 2, no. 3, pp. 63, 2018.

D. Dai and D. Gu, “Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: simulation and experiments,” Materials & Design, vol 55, pp. 482-491, 2014.

N. Contuzzi, S. Campanelli and A. Ludovico, “3D finite element analysis in the selective laser melting process,” International Journal of Simulation and Modeling, vol. 10, no. 3, pp. 113-121, 2011.

B. Zhang, L. Dembinski and C. Coddet, “The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder,” Materials Science & Engineering A, vol. 584, pp. 21-31, 2013.

P. Edwards and M. Ramulu, “Fatigue performance evaluation of selective laser melted Ti-6Al-4V,” Materials Science & Engineering A, vol. 598, pp. 327-337, 2014.

H. K. Rafi, T.L. Starr and B.E. Stucker, “A comparison of the tensile, fatigue, and fracture behavior of Ti-6Al-4V and 15-5 PH stainless steel parts made by selective laser melting,” International Journal of Advanced Manufacturing Technology, vol. 69, no. 5-8, pp. 1299-1309, 2013.

Aerospace Specification Metals. (2018). Titanium TI-6AL-4V-AMS-4911 Datasheet [Online]. Available: http://www.aerospacemetals.com/titanium-ti-6al-4v-ams4911.html

ATK Steel Corporation. (2018). 316/316L Stainless Steel Datasheet [Online]. Available:

www.aksteel.com/pdf/markets_products/stainless/austenitic/316_316l_data_bulletin.pdf

Engineering Toolbox. (2018). Young’s Modulus-Tensile and Yield Strength for Common Materials. [Online]. Available: http://www.engineeringtoolbox.com/young-modulus-d_417.html

C. Qui, N.J.E. Adkins and M.M. Attallah, “Microstructure and tensile properties of selective laser-melted and of HIPed laser-melted Ti-6Al-4V,” Materials Science & Engineering A, vol. 578, pp. 230-239, 2013.

A. Riemer, S. Leuders, M. Thone, H.A. Richard, T. Troster and T. Niendorf, “On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting,” Engineering Fracture Mechanics, vol. 120, pp. 15-25, 2014.

A.B. Spierings, N. Herres and G. Levy, “Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts,” Rapid Prototyping Journal, vol. 17, no. 3, pp. 195-202, 2011.

I. Tolosa, F. Garciandia, F. Zubiri, F. Zapirain and A. Esnaola, “Study of mechanical properties of AISI 316 stainless Steel processed by “selective laser melting”, following different manufacturing strategies,” International Journal of Advanced Manufacturing Technology, vol. 51, no. 5-8, pp. 639-647, 2010.

D. Montgomery, Design and Analysis of Experiments. Hoboken, NJ: John Wiley and Sons Publishers, 2001.

J.M. Lachin, “Introduction to sample size determination and power analysis for clinical trials,” Controlled Clinical Trials, vol. 2, no. 2, pp. 93-113, 1981.

J.P. Kruth, J. Deckers, E. Yasa and R. Wauthle, “Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 226, no. 6, pp. 980-991, 2012.

J. Jhabvala, E. Boillat, C. André and R. Glardon, “An innovative method to build support structures with a pulsed laser in the selective laser melting process,” International Journal of Advanced Manufacturing Technology, vol. 59, pp. 137–142, 2012.




© Journal of Advanced Manufacturing Technology