OPTIMIZATION OF INJECTION MOLDING PARAMETERS: IMPROVING MECHANICAL PROPERTIES OF KENAF REINFORCED POLYPROPYLENE COMPOSITES
J. K. Pandey, S. H. Ahn, C. S. Lee, A. K. Mohanty and M. Misra, “Recent advances in the application of natural fiber based composites”, Macromolecular Materials and Engineering, vol. 295, no. 11, pp. 975–989, 2010.
K. L. Pickering, M. G. Aruan Efendy and T. M. Le, “A review of recent developments in natural fibre composites and their mechanical performance”, Composites Part A: Applied Science and Manufacturing, vol. 83, pp. 98–112, 2016.
H. M. Akil, M. F. Omar, A. A. M. Mazuki, S. Safiee, Z. A. M. Ishak and A. Abu Bakar, “Kenaf fiber reinforced composites: A review”, Materials and Design, vol. 32, no. 8–9, pp. 4107–4121, 2011.
R. Dunne, D. Desai, R. Sadiku and J. Jayaramudu, “A review of natural fibres, their sustainability and automotive applications”, Journal of Reinforced Plastics and Composites, vol. 35, no. 13, pp. 1041–1050, 2016.
D. Chen, G. Lu, L. He, W. Li, and J. Yuan, “Warpage of injection-molded automotive B pillar trim fabricated with rami fiber-reinforced polypropylene composites”, Journal of Reinforced Plastics and Composites, vol. 34, no. 14, pp. 1144–1152, 2015.
A. Akbarzadeh and M. Sadeghi, “Parameter Study in Plastic Injection Molding Process using Statistical Methods and IWO Algorithm”, International Journal of Modeling and Optimization, vol. 1, no. 2, pp. 141–145, 2011.
B. Kc, O. Faruk, J. A. M. Agnelli, A. L. Leao, J. Tjong and M. Sain, “Sisal-glass fiber hybrid biocomposite: Optimization of injection molding parameters using Taguchi method for reducing shrinkage”, Composites Part A: Applied Science and Manufacturing, vol. 83, pp. 152–159, 2016.
M. Ho, H. Wang, J.H. Lee, C.K. Ho, K.T. Lau, J. Leng and D. Hui., “Critical factors on manufacturing processes of natural fibre composites”, Composites Part B: Engineering, vol. 43, no. 8, pp. 3549–3562, 2012.
P. S. M. Megat-Yusoff, M. R. Abdul Latif and M. S. Ramli, “Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites”, Journal of Applied Sciences, vol. 11, no. 9, pp. 1618–1623, 2011.
G. Singh and A. Verma, “A Brief Review on injection moulding manufacturing process”, Materials Today: Proceedings, vol. 4, no. 2, pp. 1423–1433, 2017.
J. A. Ghani, M. N. A. Mohd Rodzi, M. Z. Nuawi, K. Othman, M.N. Ab. Rahman, C.H.C. Haron and B. Md Deros, “Application of Taguchi Method for Analyzing Factors Affecting the Performance of Coated Carbide Tool When Turning FCD700 in Dry Cutting Condition”, AIP Conferences Proceedings, vol. 1315, no. 1, pp. 993–998, 2011.
H. Oktem, T. Erzurumlu and I. Uzman, “Application of Taguchi optimization technique in determining plastic injection molding process parameters for a thin-shell part”, Materials and Design, vol. 28, no. 4, pp. 1271–1278, 2007.
N. Saba, M. Jawaid, O. Y. Alothman, I. M. Inuwa and A. Hassan, “A review on potential development of flame retardant kenaf fibers reinforced polymer composites”, Polymers for Advanced Technologies, vol. 28, no. 4, pp. 424–434, 2016.
G. B. Kiran, K. N. S. Suman, N. M. Rao and R. U. M. Rao, “A study on the influence of hot press forming process parameters on mechanical properties of green composites using Taguchi experimental design”, International Journal of Engineering, Science and Technology, vol. 3, no. 4, pp. 253–263, 2011.
M.-T. Chang and C.-H. Yeh, “An innovative manufacturing process for bamboo injection molding by using TRIZ and Taguchi method”, Journal of the Chinese Institute of Industrial Engineers, vol. 29, no. 7, pp. 454–465, 2012.
M. H. . Ibrahim, M. H. A. Manaff, M. H. Othman, N. Mustafa, S. R. Masrol and N. H. Rafai, “Optimisation of Processing Condition Using Taguchi Method on Warpage for HDPE-Clay Composite”, Applied Mechanics and Materials, vol. 660, pp. 28–32, 2014.
S. Chaitanya and I. Singh, “Processing of PLA/sisal fiber biocomposites using direct- and extrusion-injection molding,” Materials and Manufacturing Processes, vol. 32, no. 5, pp. 468-474, 2017.
B. Ozcelik, A. Ozbay and E. Demirbas, “Influence of injection parameters and mold materials on mechanical properties of ABS in plastic injection molding”, International Communications in Heat and Mass Transfer, vol. 37, no. 9, pp. 1359–1365, 2010.
P. Raos and J. Stojsic, “Influence of Injection Moulding Parameters on Tensile Strength of Injection Moulded Part”, Journal of Manufacturing and Industrial Engineering, vol. 2972, pp. 13–15, 2014.
M. H. Cetin, B. Ozcelik, E. Kuram and E. Demirbas, “Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method”, Journal of Cleaner Production, vol. 19, no. 17–18, pp. 2049–2056, 2011.
© Journal of Advanced Manufacturing Technology