Experimental Study on Chemical Mechanical Planarization Process by Manufacturing Automated System

S. Ramlan, M.A. Shri Abdul Aziz, M.H.F. Md Fauadi, M.R. Muhammad

Abstract


Chemical Mechanical Planarization (CMP) process is one of the critical processes in semiconductor manufacturing. Since in typical semiconductor fab running with high volume and mixed products, good CMP process is required. The process is about planarization. In order to achieve a uniform planar surface, the process control is applied through Integrated Metrology or in this case it is Integrated Thickness Monitoring (ITM) system. ITM simplifies the process control by integrating process and measurement activities in one step. ITM provides feedback on wafer to wafer processing through metrology equipment co-existence in the process equipment. Nevertheless, there is limitation to integrated metrology features, such as recipe matching on individual equipment. In manufacturing facilities, alternative is required to overcome this. Hence, manufacturing automated system capability is extended through Computer Integrated Manufacturing (CIM) system as an alternative to the ITM system, which is called Automated Planarization System (APS). The effectiveness of the alternative system is validated through an experiment.  Experiment is done with APS and ITM setup to process similar quantity of wafers. The objective is to observe the process output between the two setups.

Full Text:

PDF

References


A. Emami-Naeini and D. de Roover, “Control in Semiconductor Wafer Manufacturing,” in 47th IEEE Conference on Decision and Control- Symposium To Honor Bill Wolovich, Cancun, Mexico, 2008, pp. 1-12.

S. Ramlan, M.A.S. Abd. Aziz, M.H.F.M. Fauadi, and M.R. Muhammad, “Study on Process Control at Chemical Mechanical Planarization by Manufacturing Automated System,” in 4th International Conference on Engineering and ICT, Malacca, 2016, pp. 153-158.

M. Sivanandini, S.S. Dhami and B.S. Pabla, “Material Removal By Chemical Mechanical Polishing – A Review,” International Journal of Advancements in Research & Technology, vol. 1 no. 5, pp. 137-144, 2012.

S. P. Rao, J. Sefani, S. Comstock and J. Larson. “Run-to-Run Process Control of Oxide CMP using Integrated Metrology,” 9th International Symposium on Semiconductor Manufacturing, 1996, pp. 411-414.

W. Hachicha, I. Moussa and R. Kolsi, “Integration of Statistical and Engineering Process Control in a Batch Processes Monitoring: Case of Alkyd Polymerization Reactor,” International Journal of Control and Automation, vol. 5, no. 1, pp. 45-62, 2012.

S. Shinde, A. Sonar and Y. Sun, “Advanced Process Control for Furnace System in Semiconductor Manufacturing,” In 2013 24th Annual SEMI - Advanced Semiconductor Manufacturing Conference (ASMC), 2013, pp. 275-279.

J. Baek and C. Spanos, “Performance of Blended Metrology Schemes Incorporating Virtual Metrology,” IEEE Transaction of Semiconductor Manufacturing, vol. 26, no. 4, pp. 506-515, 2013.

M.H.F.b.M. Fauadi, H. Lin and T. Murata, "Dynamic task assignment of autonomous AGV system based on multi agent architecture," 2010 IEEE International Conference on Progress in Informatics and Computing, Shanghai, 2010, pp. 1151-1156.

A. Bleakie and D. Djurdjanovic, “Feature extraction, condition monitoring, and fault modeling in semiconductor manufacturing systems,” Computers in Industry, vol. 64 no. 3 pp. 203-213, 2013.

A.J. de Ron and J.E. Rooda, “Performance of Workstation with Offline and Integrated Metrology,” IEEE Transaction of Semiconductor Manufacturing, vol. 20, no. 2, pp. 154-164, 2007.

F. Tan, T. Pan, Z. Li and S. Chen, “Survey on run-to-run control algorithms in high-mix semiconductor manufacturing processs,” IEEE Transaction of Industrial Informatics, vol. 11, no. 6, pp. 1435-1444, 2015.

D. Wollstein, J. Raebiger and S. Lingel, “Multiple Objective APC Application for an Oxide CMP Process in high Volume Production Environment,” in 2001 IEEE International Semiconductor Manufacturing Symposium, 2001, pp. 207-210.

K. Lensing and B. Stirton, “Perspectives on Integrated Metrology and Wafer-Level Control,” in IEEE International Symposium on Semiconductor Manufacturing, 2007, pp. 1-5.

M.H.F.B.M. Fauadi, W.L. Li and T. Murata, “Combinatorial auction method for decentralized task assignment of multiple-loading capacity AGV based on intelligent agent architecture,” in IEEE 2nd International Conference of Innovation Bio-Inspired Computer Application, 2011, pp. 207–211.

J. Nduhura-Munga, G. Rodriguez-Verjan, S. Dauzere-Peres, C. Yugma, P. Vialletelle, and J. Pinaton, “A Literature Review on Sampling Techniques in Semiconductor Manufacturing,” IEEE Transaction of Semiconductor Manufacturing, vol. 26 no. 2, pp. 188-195, 2013.

H. F. Fauadi, M. H. Nordin and Z. M. Zainon, “Frontal obstacle avoidance of an autonomous subsurface vehicle (ASV) using fuzzy logic method,” in International Conference of Intelligence Advance System, 2007, pp. 125–128.

W. Jiang and J.V. Farr, ”Integrating SPC and EPC Methods for Quality Improvement,” Quality Technology & Quantitative Management, vol. 4, no. 3, pp. 345-363, 2007.

J.V. Ringwood, S. Lynn, G. Bacelli, B. Ma, E. Ragnoli and S. McLoone, “Estimation and Control in Semiconductor Etch: Practice and Possibilities,” IEEE Transaction of Semiconductor Manufacturing, vol. 23, pp. 87-98, 2010.




© Journal of Advanced Manufacturing Technology