Design of Integrated Bandpass Filter-Vivaldi Antenna for Microwave Applications

Dayang Azra Awang Mat

Abstract


This paper presents the proposed design of Integrated Bandpass Filter-Vivaldi Antenna for microwave system applications. Both of these passives components play important roles as the front-end device in transceiver technology. Conventionally, antenna and filter are connected separately leading to impedance mismatch that would affect the whole performance of the overall system. To overcome this problem, an integrated filter-antenna design is proposed, where both devices are combined together into a single sub-module. The proposed design would benefit so much in terms of miniaturization and cost. The proposed antenna and filter used in this research is the antipodal Vivaldi antenna and an Open-Loop Resonator Bandpass Filter (OLRBPF) operating at 2.4GHz frequency band. The structure is constructed on an FR4 substrate with a thickness of 1.6 mm and permittivity of 4.7 using cascaded and co-design method. The proposed designs are simulated in Agilent Advance Design System (ADS2016). It is shown that the size of both devices is reduced, the performance of the filter antenna is also enhanced in terms of directivity up to 9.538dBi (co-design) and 5.860 dBi (cascaded).


Keywords


antenna, engineering, microwave, filter

Full Text:

PDF

References


J. B. Jadhav and P. J. Deore, Filtering antenna with radiation and filtering functions for wireless applications, Journal of Electrical Systems and Information Technology, 2016.

H. Tang, J. X. Chen, H. Chu, G. Q. Zhang, Y. J. Yang and Z. H. Bao, Integration Design of Filtering Antenna with Load—Insensitive Multilayer Balun Filter, IEEE Trans. on Components, Packading and Manufacturing Tecnology, vol.6(Issue 9), September 2016.

Wei-Jun Wu, Qi-Feng Liu, Qi Zhang, and J.-Y. D., Co-Design of A Compact Dual Band Filter-Antenna For WLAN Application, Progress in Elec. Res. Lett., vol. 40, pp. 129–138, 2013.

N. I. A. Zainuddin, Integrated Filter Antenna for 2.4 GHz Application, Bac. Eng. (Hons.) dissertation, Dept. of Elect. and Electronic Eng., University Malaysia Sarawak, Malaysia, 2014.

R. Natarajan, J. V. George, M. Kanagasabai, L. Lawrance, B. Moorthy, D. B. Rajendran and M. G. N Alsath, Modified antipodal Vivaldi antenna for ultra-wideband communications. IET Microwaves, Antennas & Propagation, 10(4), 401-405, 2016.

G. Mansour, M. J. Lancaster, P. S. Hall, P. Gardner, and E. Nugoolcharoenlap, Design of Filtering Microstrip Antenna Using Filter Synthesis Approach, Prog. Electromagn. Res. Lett, vol. 145, no. February, pp. 59–67, 2014.

N. N. M. Noor, D. A. A. Mat, A. Amran., D. K. A. Zaidel, and A. Joseph, The Effect of Chamfering Structure towards the Design of Open Loop Resonator Bandpass Filter for Microwave Applications, Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 8(12), 123-127, 2016.

N.N.M. Noor, Development of open-loop resonator bandpass filter with chamfering folded structure for 2.4GHz application, Bac. Eng. (Hons.) dissertation, Dept. of Elect. and Electronic Eng., University Malaysia Sarawak, Malaysia, 2016.

S. S. Pawar, An Integrated Antenna-Filter Co-Design Cascade Approach for UWB Range, International Journal of Engineering Research & Technology (IJERT), vol. 4 (Issue 5), pp. 1225–1227, May 2015.

D. A. A. Mat, A. Amran, N. S. Hasim, D.N.A. Zaidel, A.S.W.Marzuki & R. Sapawi, Integrated open loop resonator filter with notch patch antenna for microwave applications, Telecommunication, Computing, Electronics and Control (TELKOMNIKA), vol. 5 (5), 2017.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.